Principal

 

 


Prof. (Dr.) Jeoju M Issac
Principal

Prof. (Dr.) Jeoju M Issac taken over as Principal College of Engineering Munnar on 28/11/2022. He took his B.Tech degree in Mechanical Engineering from M A College of Engineering Kothamangalam on 1988. He took his post-graduation in Mechanical Engineering from the premier institute IIT Madras, also accredited with a Ph.D from the same institute in the subject Performance and Flow field measurements in different types of diffusers of centrifugal compressors.

Prof. (Dr.) Jeoju M Issac started his career with the Department of Mechanical Engineering, Mar Athanasius College of Engineering at Kothamangalam as Lecturer in 1990. In his rich and illustrious career spanning over 3 decades at Mar Athanasius College of Engineering Prof. (Dr.) Jeoju M Issac became a dedicated and passionate professor specialized in Fluid Mechanics-Turbomachines. He retired from service as Head of the Department of Mechanical Engineering at Mar Athanasius College of Engineering, Kotahamangalam.

He has published 24 research papers and presented in 10 conference seminars. He Guided five Ph.D projects in which four were awarded and one is under progress.

Referred Journals  

 

  • Sitaram, N and Issac J. M., (1997) An experimental investigation of Centrifugal Compressor with Hub vane diffusers. Proc. of Inst. Mech. Engineers, Part A: J. Power and Energy, Vol. 11, No. 5, pp. 411-427.
  • Issac J. M., N. Sitaram and M. Govardhan (2003) Performance and Wall Static   Pressure Measurements on Centrifugal Compressor Diffusers. Proc. of Inst. Mech. Engineers, Part A: J. Power and Energy, Vol. 217, No. 5, pp. 547-558.
  • Issac J. M., N. Sitaram and M. Govardhan, (2003) Effect of Diffuser Vane Chord Length and Camber angle on the Performance of a Centrifugal Compressor. Submitted for publication in Proc. of Inst. Mech. Engineers, Part A: J. Power and Energy.
  • Sitaram, Issac J. M. and M. Govardhan, (2006) Effect of Diffuser Vane Height and Position on Diffuser Wall Static Pressures in a Centrifugal Compressor. Journal of Aero space Sciences and Technologies, Vol. 58, No.4, pp322
  • Sitaram, Issac J. M. and M. Govardhan, (2008) Flow Measurements in passages of different diffusers of a centrifugal compressor at design condition. Journal of Aero space Sciences and Technologies, Vol. 60, No.1, pp26
  • Venu P., Issac J.M,(2011) Internet Based Material Selection for Quality Function Deployment International Journal of Engineering Research and Applications01, No.03, pp1247
  • Venu P., Issac J.M,(2011) Global remote quality function deployment object. Int. J. on Recent Trends in Engineering and Technology, Vol.05, No.04, pp40.
  • Sajeev John., Issac J.M,(2011) Mechanical properties of Natural rubber latex coagulated by a natural rubber International journal of Advanced Enginnering Sciences and Technologies 08, No.02, pp177
  • Sitaram, Issac J. M. and M. Govardhan, (2012) Flow Measurements in passages of different diffusers of a centrifugal compressor at off design conditions. Journal of Aero space Sciences and Technologies, Paper Code: V64 N2/759-2012.
  • Jose Cherian and Issac J.M(2013) Effectof process variables in abrasive flow machining. Journal of Emerging Technology and advanced Engineering, Vol.03, No.02, pp554.
  • Jose Cherian, Jeoju M Issac,(2013) Effect of Process Variables in Abrasive Flow Machining , International Journal of Emerging Technology and Advanced Engineering , Vol 3, Issue 2, February, pp 554-557.
  • Venu P., Issac J.M,(2013) Intelligence Based Customer Requirements Selector Model for QFD Journal Of Computing Technologies02, No.02, pp73.
  • Kuriachen Basil., JosephkujuPaul, Issac J.M,(2013) Spark Gap Optimization of WEDM Process on Ti6A14V International Journal Of Engineering science and Innovative Technalogy02, No.01, pp364.
  • Sajeev John, Jeoju M Issac, Roselin Alex, (2014) Mechanical Properties of Natural Rubber Composites Reinforced With  Lignin  From Caryota  Fibre , International Journal of Emerging Technology and Advanced Engineering,Vol.4,Issue 4 ,April ,pp 567-570.
  • Jose Cherian, Jeoju M Issac,(2014) Advances in Abrasive Flow Machining: An Overview, International Journal Metallurgical & Materials Science and Engineering (IJMMSE),Vol.4 Issue 1,February ,pp 15-23.
  • Ajith M.S, Jeoju.M.Issac,(2015) Design and Analysis of Centrifugal Pump Impeller using Ansys Fluent. International Journal of Science , Engineering and Technology Research, Vol.4,Issue 10, October ,pp 3640- 3643.
  • Mohammed Faisal K, Jeoju M Issac, (2015) Analysis and Performance Prediction of Data Centre with Different Configurations using CFD. International Journal of Engineering Research &Technology, Vol.4, Issue 10 ,October, pp 570-575.
  • Venu P, Jeoju M Issac,(2014) A Customer Driven Decision Support System based on Quality Function Deployment, International Journal of Application or Innovation in Engineering & Management (IJAIEM) ,Volume 3, Issue 1, January ,pp 465-467.
  • Jose Cherian, Jeoju M Issac,(2015) Effect of process parameters on wear performance in Abrasive Flow Machining, Applied Mechanics and Materials Vols. 766-767 (2015) pp 661-667 .
  • Sajeev John, Rani Joseph, Jeoju M Issac,(2015) Mechanical and cure characteristics of natural rubber composites with Caryota fibre incorporated in dry stage and latex stage , Applied Mechanics and Materials, Vols. 766-767, pp 100-103.
  • Suji P.V, Jeoju M Issac, Shidin K.V, Abdul Salam C.A,(2018) Experimental Analysis through Heat Pump Assisted Dryer, International Research Journal of Engineering and Technology (IRJET) ,Volume: 05 Issue: 04, April, pp 167-171.
  • Shidin K.V, Dr. Jeoju M Issac, Suji P.V, Abdul Salam C.A,(2018) Experimental Analysis of Heat Pump Assisted Circular Dryer, International Research Journal of Engineering and Technology (IRJET) ,Volume: 05 Issue: 04, May, pp 286-291.
  • Abdul Salam C A, Jeoju M Issac, Binu Markose(2018) Numerical Study of Archimedean Screw Turbine Numerical Study of Archimedean Screw Turbine, International Research Journal of Engineering and Technology (IRJET) ,Volume: 05 Issue: 04, April , pp 2401 – 2405.

 

 Conference Proceedings 

  • Issac J. M., N. Sitaram and M. Govardhan (2002) Performance and Wall Static Pressure Measurements on Centrifugal Compressor Diffusers. Proc of 4th Inter. Conf. on Pumps and Fans (4th ICPF), August 26-29, 2002, Beijing, China, pp. 192-199.
  • Issac J. M., N. Sitaram and M. Govardhan, (2002) Vane Surface Static Pressure Measurements on Centrifugal Compressor Diffusers. Second International (29th National Conference on Fluid Mechanics and Fluid Power (INCFMFP-2002), 801- 809. Roorkee, India.
  • Issac J. M., N. Sitaram and M. Govardhan, (2003) Effect of Diffuser Vane Height on the Performance of a Centrifugal Compressor. Accepted for presentation at the 30th National Conference on Fluid Mechanics and Fluid Power and publication in the proceedings, Dec. 11-13, Surathkal, India.
  • Issac J. M., N. Sitaram and M. Govardhan, (2003) Effect of Diffuser Vane Height on Diffuser Wall Static Pressure Distribution in a Centrifugal Compressor. Accepted for presentation at the 55th Annual General Meeting of the Aeronautical Society of India and publication in the proceedings, Dec. 17 & 18, Bangalore, India.
  • N Sitaram, J M Issac and M Govardhan, (2006) Flow Measurements in Passages of Different Diffusers of a Centrifugal Compressor. International Conference on Advances in Mechanical Engineering SRM University, Dec.14-16, pp. 407-414 Chennai, India.
  • Ernest Markose Mathew and Jeoju M. Issac, (2020)“Experimetal study and analysis on influence of baffles structures in air distribution in a swirling fluidized bed”. International conference on Science and Technology of Advaned Materials. AIP publishing, Vol.2263, Pages 040010-1-040010-5